|
TAVOR SAR or X95 556NATO Bolt (in-house conversion service)
|
|
TAVOR X95 Conversion Kit (9mm Para)
|
|
TAVOR X95 Conversion Kit (300 Blackout)
|
Our Price: $109.99 Setup Cost: $30.00
|
|
|
List Price: $899.99 Our Price: $749.99
|
|
|
List Price: $899.99 Our Price: $749.99
|
|
|
|
|
|
IWI TAVOR SAR or X95 Bolt Conversion for 5.56NATO or 300BLK!
Bullpup Armory is a CERTIFIED IWI TAVOR ARMORER! Send us your TAVOR SAR or X95, and we'll switch the ejection to the other side per IWI specs. When you get your rifle back, you'll have the new configuration, plus the original bolt, for when you need to switch back to the original configuration. Fastest turnaround times in the industry!
** IWI-US requires the Tavor barrel and new bolt to be headspaced by an IWI certified gun-smith/armorer **
* Bolts are not available individually without purchasing a barrel set, or sending your Tavor to us for the install. (IWI Policy)
|
IWI TAVOR® X95™ Conversion Kit converts an existing 5.56 rifle into a 9mm.
Includes all the parts needed for the 9mm X95™ conversion.
Please note this kit only works with the Tavor® X95™!The 9mm kit will come in right hand configuration however it is fully convertible to left ejecting (follow the instructions in your owners manual). ** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...) |
IWI TAVOR® X95™ Conversion Kit converts an existing 5.56 rifle into a 300 Blackout (.300 AAC).
Includes all the parts needed for the X95™ 300BLK conversion.
Please note this kit only works with the X95™!16.5" Barrel
Right Hand Bolt
30-Round Magazine ** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...) |
|
|
|
Percival Armaments - Tavor X95 Dust Protection Plate
|
|
ShootingSight TAV-D - TAVOR LE 2-STAGE RPS TRIGGER™ – DELRIN HOUSING
|
|
IWI Tavor® 9mm Aluminum Muzzle Brake 4-5/8"
|
|
|
|
|
|
|
|
|
Percival Armaments makes improvements
to the tactical shooting experience of the Tavor X95 with the redesign of
the Dust Protection Plate.
Adding a charging handle/rod to both sides of the Tavor X95 is now possible while keeping the function of a dust protection plate as part of the gas system.
A Barrel Lock Wrench is needed to make this upgrade. Made in the USA!
|
ShootingSight LLC has developed a 2-Stage "Drop-In" Trigger Pack (Fire Control Group) for the IWI Tavor X95 and SAR. The TAV-LE is a 2-stage trigger pack for the IWI Tavor rifle with a slightly higher pull force (than the TAV-D) for tactical use. With a major reworking of the internals, and using superior quality parts, the TAV-LE gives the needed improvement to the only short-coming of the Tavor. With a 4.5lb first stage, 6.5lb total pull (approximate), you will enjoy the smooth and crisp trigger operation of this perfect upgrade! This fire control pack will work in all X95 and SAR US receivers.
Made in the USA!
|
With this Tavor® muzzle brake you can extend your 9mm Tavor® to 30" overall length.
|
|
|
|
IWI Tavor® 556NATO Aluminum Muzzle Brake 4-5/8"
|
|
Tavor X95 Curved Buttpad
|
|
IWI TAVOR X95 Cocking Bar Assembly - charging handle with rod
|
|
|
Our Price: $72.99 Sale Price: $65.99
|
|
|
|
|
|
|
|
With this Tavor® muzzle brake you can extend your 5.56/.233 Tavor® to 30" overall length.
|
The X95 Curved Buttpad features an aluminum skeleton structure with an overmolded rubber pad. The rubber pad is curved to conform to the shoulder and not only give better ergonomics and grip but also shortens the overall length of pull on the rifle. By keeping the top edge the same length as the OEM buttpad the rifle does not drop under 26" inches in length.
6.5 ounces. Fits the X95 (not the SAR or 7)
Made in the USA
|
A spare cocking bar with handle for your Tavor® X95. If you've bent or notched your cocking rod, or just want a second for dual handles, this is a must-have factory replacement. Assembled Charging Handle and Rod.
IWI-US Factory Part # TXP0020
|
|
|
|
IWI TAVOR X95 Fire Control Hammer-Sear Pack
|
|
IWI TAVOR SAR Bolt Parts Kit - 5.56 NATO "Survival Kit"
|
|
IWI TAVOR SAR-X95 Barrel Locking Pivot Assembly
|
Our Price: $188.99 Sale Price: $179.99
|
|
|
List Price: $49.99 Our Price: $44.99
|
|
|
|
|
|
|
|
A complete drop in spare factory fire control pack for your Tavor® X95. This fire control pack will work in both SAR and X95 receivers. Reduces trigger pull weight when compared with the original Tavor® SAR
|
Essential factory spare bolt parts with spare firing pin, firing pin spring, and other bolt parts for your Tavor® SAR or X95 in 5.56 NATO.
|
Broke your pivot?! Here's a spare barrel pivot lock for your Tavor® SAR or Tavor® X95™. You will need a Tavor® Barrel Wrench Tool to complete the process.
The removal and installation of this part should be completed by a certified gunsmith/armorer. BULLPUP ARMORY is IWI Certified! Contact us, if you want us to install/repair your Tavor...
|
|
|
|
IWI TAVOR SAR Firing Pin with spring - 556NATO
|
|
Tavor X95 Pistol Grip - with traditional trigger guard
|
|
Tavor X95 ForeGrip - SHORT
|
List Price: $19.99 Our Price: $17.99
|
|
|
|
|
|
|
|
|
Spare factory firing pin and firing pin spring for your Tavor® SAR and X-95 in 5.56 NATO
|
A Pistol grip with traditional trigger guard for your Tavor® X95™ or Tavor® 7.
Please follow Section 14.1.4 Hand Grip Assembly in your Tavor® X95™ manual for removal and installation of your grip. A metric hex wrench is needed to remove the side panel screws.
|
Wanting to SBR your X95? Here's the short foregrip for your Tavor® X95™!
Available in BLACK, FDE, and ODG
Made in Israel.
|
|
|
|
Tavor X95 Buttplate - THIN - SBR
|
|
Tavor® X95™ SBR Aluminum Flattop Rail - SHORT
|
|
Tavor® X95™ IDF Pistol Grip Panels (Inserts)
|
|
|
|
|
|
|
|
Wanting to SBR your X95? Here's the thin buttplate for your Tavor® X95™!
LEGAL WARNINGS: See the technical specs for details before ordering
Hard Polymer.
Made in Israel.
|
Wanting to SBR your X95? Here's the short top rail for your Tavor® X95™!
Ideal for use with a 13-inch barrel and short foregrip. IWI factory aluminum part.
Made in Israel.
|
A pair of left and right IDF pistol grip panels for your Tavor® X95™ pistol grip with Tavor style trigger guard or traditional trigger guard.
These grip panels are identical to those currently on the X95 in use with the Israel Defense Force.
Choose your color: Black, FDE, OD
|
|
|
|
TAVOR and X-95 Zeroing Sight Wrench - factory
|
|
|
|
|
List Price: $9.99 Our Price: $8.99
|
|
|
|
IWI TAVOR SAR and X-95 Sight Tool for zeroing the integral rail back-up sights
Always refer to the IWI Tavor Owners Manual.
|
|
|
