|
|
|
|
|
|
|
|
|
|
|
|
|
Mesa Tactical's Kel-Tec KSG 12-Shell (6 per side) SureShell Side Saddle Mount w/ Rail
Includes the new taller blocks to fit all KSG models!
Replaces the original Kel-Tec top rail
Made in the USA!
|
Mesa Tactical's Kel-Tec KSG replacement anodized aluminum Picatinny optics rail.
Taller than the original rail, and with small aluminum flanges on either side of the main rail can accept additional lengths of Picatinny rail to support weapon lights or targeting lasers (small side rails sold separately).
Made in the USA!
|
Replacement rail for the Tavor SAR or X95. This is the "short" version. The SAR rail has a 20-slot rail that extends just over the gas block, and the X95 rail has 24-slots with the gas adjustment hole for 300BLK. Both add some height for a more comfortable cheek weld. Another advantage is that the rail does not need to be removed to do a barrel change (no re-zeroing!). The "short" version gives the flattop SAR owner a mod that inspires a more IDF-model look. And the X95 short rail is inspired by the Israeli sub-machine-gun X95.
Choose SAR or X95 Made in the USA! ** This listing is for the replacement rail only! The rifle, optics, and any other accessories shown are for display purposes only...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement rail for the Tavor. This is the "Full Length" version, which is a 35-slot rail that is the same length as the flat-top models, but adds some height for a more comfortable cheek weld. Another advantage is that the rail does not need to be removed to do a barrel change (no re-zeroing!). Made in the USA! ** This listing is for the replacement rail only! The rifle, optics, and any other accessories shown are for display purposes only...
|
Replacement rail for the Steyr AUG. This is a 23-slot rail that is the same as the factory rail, but weighs only 5.5 ounces. Three QD sling swivel ports (one in the front, factory location, and one on each side at the rear of the rail, far enough behind the charging handle to not get in the way!) The Razorback line of rails incorporates the GHW USA Mounting System for additional accessories and mounting positions in a compact platform. Note: This does not fit the new A3 M1. Only the regular A3.
Made in the USA!
|
Finally IDF owners have a way to use thier own magnifier on their IDF-model Tavor. The Gear Head Works IDF Magnifier Rail has a 7-slot standard Mil Spec 1913 rail and a quick rotating mount all machined as one piece. It can be used with magnifiers, night vision, or thermal and allows the entire unit to be quickly removed from the rifle. No need for expensive QD rings. Use a standard fixed ring or mount and let this rail be the way you attach it in the field. Made in the USA! ** IDF Model only! Not for use with "Flat-Top" Tavors... **
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A taller rail for the IDF model Tavor, for a more comfortable cheek-weld. The IDF 101 Rail from Gear Head Works replaces the factory installed Mepro, attaching directly to the gas block (similar to the factory installed Mepro). And it still allows for a co-witness with the factory flip-up sights. Made in the USA!
** IDF Model only! Not for use with "Flat-Top" Tavors... **
|
Mesa Tactical's Kel-Tec KSG 6-Shell (LEFT side) SureShell Side Saddle Mount w/ Rail that fits all KSG models!
Replaces the original Kel-Tec top rail
Made in the USA!
|
Mesa Tactical's Kel-Tec KSG 6-Shell (RIGHT side) SureShell Side Saddle Mount w/ Rail that fits all KSG models!
Replaces the original Kel-Tec top rail
Made in the USA!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gear Head Works Razorback Front Sight matches up to most AR15 rear sights when used on your short Tavor Razorback. Inspired by the factory IDF front sight, it operates the same way, folding up and down just like the factory IDF front sight.
The Razorback Front Sight comes with genuine IDF hardware making it fully adjustable for elevation and windage. However, it does NOT come with a front sight post, plunger or plunger spring (typically the tritium front sight post, spring, and plunger should be used from your original flat top rail.) Made in the USA!
|
An aluminum replacement forearm with modular capabilities for the Tavor by Gear Head Works, called the Tavor Modular Forearm, or simply the TMF. Light mounting is included! Attach 1" light or laser in-line with the barrel, slots for ventilation and accepts Magpul M-Lok accessories.
Black, FDE, or OD Green
Rifle, light, grip, pressure pad, and pad kit shown in pictures, not included.
Made in the USA!
|
45 Degree Offset Accessory Rail
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22.5 Degree Offset Accessory Rail by Midwest Industries
|
A 90-degree side rail that positions a two slot picatinny rail in the optimal position for a side-saddle, or other rail accessory.
This side rail is intended for the Bullpup Unlimited conversions, but will work for other platforms with picatinny rails if the side clearance is enough to accept the mount. Designed to be symmetrical, so it can be mounted for use on either side of the firearm.
Durable polymer construction, but weighs just under an ounce.
Made in the USA!
|
The latest innovation in sling accessories from Damage Industries. Simple to use, low profile and versatile.
90 degree QD swivel mount, precision machined from 6061 T6 Aluminum alloy with Mil-A-8625 Type III Class 2 Hardcoat Anodized finish.
Perfect for the rear-lower rail of the RFB!
Made in the U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polymer rail that attaches to the Fore-Grip for mounting a vertical grip to the TAVOR.
GRIP ADAPTOR ACCESSORIES ASSEMBLY - RAIL
IWI-US Factory Part # 0070475320
|
T-REx (Tavor Rail Excel) is an aluminum rail that attaches to the Fore-Grip for mounting a vertical grip to the TAVOR. Made from billet aluminum and is Hard Anodized in Black. Mounts using the existing mounting points of the Tavor SAR, and comes with the properly sized screw (NO drilling required!) And now the LT model (Long, Threaded) is longer with a threaded mounting hole for a bipod or sling swivel.
Made in the USA!
|
A 9-slot Side Rail for the P90/PS90 with QD Port. Fits on either side of the receiver (into the existing tapped holes), and has built in standoff mounts, so accessories will clear. With the QD Port mounted towards the rear, your sling won't be in the way of lights/lasers on the rail.
Precision
machined aluminum with a Mil-spec anodized finish.
Made in USA!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A lowered optic rail for the P90/PS90 .... Mounts to receiver with a spanner-nut allowing for some windage fine-tuning, the same as the factory optic rail.
12-slot Picatinny. Precision machined from aluminum billet. Hardcoat anodized BLACK
Made in the USA!
|
A 7-slot Side Rail for the P90/PS90. Fits on either side of the receiver (into the existing tapped holes), and is close to the receiver, but not quite flush. The 7-slot rail has built in 3/16" standoff mounts, so accessories will clear. The entire rail is only 3/8" off the receiver.
Precision
machined aluminum with a Mil-spec anodized black finish.
Made in USA!
|
Extended 1913 optic rail for the P90/PS90 makes it possible to mount accessories and illumination devices forward of the receiver while keeping them clear of your peripheral vision/target acquisition and inside the natural firing and manipulation positions. Allows laser aiming modules to be mounted on the same axis as the optic for increased accuracy. Mounts exactly the same as the factory ring sight or optic rail. "Iron sights" built-in.
Precision machined in the USA from aluminum billet. Hardcoat anodized to Mil-A-8625 Type III Class 2 specs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FN Factory Part. Military specification 1913 picatinny rail replaces the factory standard sight to allow the mounting of an optic.
|
The Hi-Tech Customs KSG Extended Lower Rail slides over the existing rail on the bottom of the fore-arm. The Extended Rail is CNC Machined from lightweight Aircraft Billet Aluminum, and is ergonomically designed with rounded edges and a slim profile. Prevents plastic rail breakage if you use a vertical fore-grip.
Made in the USA!
|
The Hi-Tech Customs KSG Lower Rail slides over the existing rail on the bottom of the fore-arm. The Lower Rail is CNC Machined from lightweight Aircraft Billet Aluminum, and is ergonomically designed with rounded edges and a slim profile. Prevents plastic rail breakage if you use a vertical fore-grip.
Made in the USA!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Picatinny side rail(s) that only fit the Mesa Tactical KSG Sureshell Carrier and the Mesa Tactical KSG Rail.
This proprietary picatinny rail adheres to the MIL-STD 1913 specification for firearms accessory rails. It is machined from 6061-T6 aluminum alloy, then Type III hard anodized for a rugged black finish.
Made in the USA
|
The Hi-Tech Customs KSG Mini Side Angle Rail fits over the sling loop near the muzzle of the shotgun. The Rail is CNC Machined from lightweight Aircraft Billet Aluminum, and is ergonomically designed with rounded edges and a slim profile. Perfect location for a light or other accessories.
Made in the USA!
|
MAGPUL MOE Polymer Rail Sections - 7-Slot - 3.3" long
Fits the ZK-22!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The MOE Illumination Kit includes everything needed to mount a 1913 Picatinny rail compatible weapon light to a MOE Hand Guard or Forend, including the Gear Head Works Tavor Modular Forearm (TMF).
The four-piece kit includes a short rail section, cantilever rail mount, two Surefire® optimized pressure switch pad mounts (both old and new styles), and all mounting hardware.
Made in U.S.A.
|
MAGPUL MOE Polymer Rail Sections - 5-Slot - 2.5" long
Fits the GHW Tavor TMF!
Made in the USA!
|
MAGPUL MOE Polymer Rail Sections - 9-Slot - 4.1" long
Fits the Gear Head Works Tavor TMF!
Made in U.S.A.
|
|
|
