|
|
|
|
|
|
|
|
|
|
|
|
|
Anodized aluminum replacement charging handle for the FS2000. This robust replacement part fixes the issues with the original plastic piece, and provides a bigger and serrated surface for charging the Bullpup!
Made of T6 6061 Aluminum with mil-spec type 3 Class 2 hard anodize, Black
These "JudoChop" handles are precision engineered by Aerospace Resource Group manufacturing (Gen 4).
|
After 2 years with the original GHW AUG low profile charging handle we are happy to make available the next generation, the AUG-CH-Mod1.
This handle is lighter and shorter. It sticks out less and is a 1 finger charge size. It has a deep finger groove with serrations to ensure positive action. The outside edge is longer and much more contoured than the old design resulting in more comfort when the rifle is slung.
The biggest new feature to the Mod1 version is the ability to fold up and utilize the forward assist. By utilizing all the factory springs and hardware, the handle stays down in the ergonomic angle GHW's pioneered with the original handle. But when needed, simply push up on the handle and it folds to engage the forward assist. More serrations provide a slip free action when using it this way. The handle can also be folded up when locked back to give the rifle the ability to lay flatter on a surface. Normal operation still leaves the handle straight out to the side when locked back and it still has the ability to be slapped to unlock.
Made in the USA!
|
Extended Charging Handle for the PS90, more than doubles the surface area of the original part. Giving a more comfortable feel and positive contact when charging your PS90. Get one for the strong side, or two for extending on both sides.
Made in the USA!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
An Oversized Charging Handle for the P90/PS90, providing more surface
area, and greater depth to manipulate the handle. One per package, but
fits either side of the P90/PS90.
Black Nylon and Carbon Fiber.
Made in the USA!
|
A "hooked" Charging Handle for the P90/PS90, providing more surface
area, and greater depth to manipulate the handle. One per package, but
fits either side of the P90/PS90.
Black Nylon and Carbon Fiber for a super tough and strong part.
Made in the USA!
|
The Handler was developed by K&M Aerospace to solve the need for a replacement charging handle for the P90 / PS90. The folding charging handle is made out of aircraft grade aluminum and anodized to mil spec type III, class 2. There is a ball detent that keeps the handle folded in when not in use.
Made in the USA! Patent Pending
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Kel-Tec RFB Tactical Operating Handle is approximately 100% longer, approximately 20% wider, and has a stronger, wider scallop cutout compared to the original RFB charging handle. The combination of these allow for easier and smoother operation. And, just like the original, it can be mounted on either side of the RFB (ambidextrous!)
Made in the USA!
|
The Homeland Guns K9 is an Aluminum
charging handle for the FN PS90 that replaces the factory plastic knob. It has been
hard coated Black, has a set screw installed, and there is an Allen-Key
included. All you need to do is pry the plastic knob up and over the
raised area on the charging bar and slide it off. The K9 slides right
on and snugs up using the set screw. One handle per package, so you can do one side, or get two to be ambi!
Made in the USA!
|
An extended switch on the KSG is easier to "find" than the original, which leads to faster magazine-tube transitions. Machined from Aircraft 2024-T3 Billet Aluminum, and Black Hard Anodized to Military spec MIL-A-8625 Type III Class 2 for Steel like Strength. Easy to install yourself with simple to follow directions and Allen Key included. This Switch if for the "Gen 2" or "Gen 2.5" KSG's (which is most of the KSG's on the market. But see the pictures for the differences).
Made in the USA!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A FOLDING Charging Handle with Cocking Bar for your Tavor® SAR. Gear Head Works has "hit it out of the park" with this Tavor upgrade!
The handle is ergonomic and fits the fingers nicely. With the detent, the handle will stay open or closed, and can be manipulated with the flick of a finger. In the folded position, it has clean lines and no longer protrudes, solving some of the issues with cases and certain sling positions. Can be installed on either side of the Tavor.
Made in the USA!
|
A spare cocking bar, handle and general pin for your Tavor® SAR. If you've bent or notched your cocking rod, this is a must have factory replacement. Charging Handle, Rod Assembly, and Pin are included.
IWI-US Factory Part # TP0125
|
A spare cocking bar with handle for your Tavor® X95. If you've bent or notched your cocking rod, or just want a second for dual handles, this is a must-have factory replacement. Assembled Charging Handle and Rod.
IWI-US Factory Part # TXP0020
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A must have while cleaning and checking the bore of any barrel!
• Works on Bullpup Rifles, Bullpup Shotguns, and even Pistols
• Long life, bright LED bulb
• Flexible Shaft for easy operation, and to see those hard to reach areas
• Small and Compact
• Black with "Bullpup Armory" on the side
• One AAA battery Included
|
BULLPUP ARMORY Long Sleeve T-Shirt in Heather Gray with Dark Gray Text. "Bullpup Armory" printed on the left sleeve. And Bull and Pup artwork on the back. 100% Cotton and Tagless. Available in adult sizes: Medium, Large, X-Large, and XX-Large
|
BULLPUP ARMORY Short Sleeve T-Shirt in Olive Drab with Black Text. "Power, Mobility, Balance" with Bullpup triangle symbol printed on the front, left chest. And "Bullpup Armory" stenciled in Black text on the back. 100% Cotton T's. Available in adult sizes: Medium, Large, X-Large, XX-Large and XXX-Large.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bullpup Armory Vinyl Sticker
4" wide x 2" tall
Split backing for easy installation
Outdoor Silkscreen Vinyl Stickers
3 Coats of 100% UV Protection
5 Year Effective Outdoor Capability One sticker is included for free in each order of Bullpup parts and accessories. Additional Stickers can be ordered here.
|
Bullpup Armory Vinyl Triangle Sticker
4-1/2" wide x 1-1/2" tall
Outdoor Silkscreen Vinyl Stickers 100% UV Protection Show your love of Bullpup's, without scaring people that don't understand the Second Amendment (or the First!)...
|
The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!
Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.
Made in the USA!
|
|
|
|
|
|
|
|
|
|
|
|
The perfect gift for the Bullpup enthusist!
When you click the "Add to Cart" button you can choose the delivery method (emailed directly or we print & mail it), and choose the amount of the gift ($5.00 minimum).
The "Email delivery method" is sent when we process the payment, so usually the same day (and almost always within 24 hours).
Or choose the "Print & Mail delivery method", and we'll get it mailed within 24 hours via First-Class USPS Mail (usually delivered within 3-7 business days).
If you need something customized to fit your needs, contact us directly, or put some comments when checking out.
$5.00 minimum, no expiration!
|
|
|
