|
Gear Head Works Tavor Razorback - Short
|
|
Gear Head Works Tavor Razorback - Full Length
|
|
GGG 45 Degree Offset Accessory Rail
|
|
|
|
|
|
|
|
|
Replacement rail for the Tavor SAR or X95. This is the "short" version. The SAR rail has a 20-slot rail that extends just over the gas block, and the X95 rail has 24-slots with the gas adjustment hole for 300BLK. Both add some height for a more comfortable cheek weld. Another advantage is that the rail does not need to be removed to do a barrel change (no re-zeroing!). The "short" version gives the flattop SAR owner a mod that inspires a more IDF-model look. And the X95 short rail is inspired by the Israeli sub-machine-gun X95.
Choose SAR or X95 Made in the USA! ** This listing is for the replacement rail only! The rifle, optics, and any other accessories shown are for display purposes only...
|
Replacement rail for the Tavor. This is the "Full Length" version, which is a 35-slot rail that is the same length as the flat-top models, but adds some height for a more comfortable cheek weld. Another advantage is that the rail does not need to be removed to do a barrel change (no re-zeroing!). Made in the USA! ** This listing is for the replacement rail only! The rifle, optics, and any other accessories shown are for display purposes only...
|
The 45-degree Offset Accessory Rail is an ambidextrous design, that allows for small micro red-dot optics to be mounted at a 45 degree anfle for close range engagements.
|
|
|
|
QD Rail Sling Mount Low Pro 90 degree
|
|
Damage Industries Multi Mount
|
|
Tapco Intrafuse Riser Mount
|
|
|
|
|
|
|
|
The latest innovation in sling accessories from Damage Industries. Simple to use, low profile and versatile.
90 degree QD swivel mount, precision machined from 6061 T6 Aluminum alloy with Mil-A-8625 Type III Class 2 Hardcoat Anodized finish.
Perfect for the rear-lower rail of the RFB!
Made in the U.S.A.
|
Attach your sling in multiple configurations on any 1913 rail. Mount it to the top, sides or bottom of your rifle with loop, QD swivel, snap-hook, Mash hook, or paracord. QD sockets have anti-rotational limits. Constructed of billet aluminum with Mil-A-8625 type III class 2 hardcoat anodize. Black.
Swivel/hook not included.
Sold individually.
Made in the USA!
|
The INTRAFUSE Riser Mount is a lightweight mount that lets you lift your optics.
The side locking nuts are made to be used without the need to carry any extra tools.
Made from the highest strength composite this mount is tough without adding unneeded weight.
|
|
|
|
Tavor® X95™ SBR Aluminum Flattop Rail - SHORT
|
|
ShootingSight TAV-TOOL - multi-tool specifically for the Tavor® X95 and SAR
|
|
Bullpup Armory 4"x2" PVC Patch with Velcro Backing
|
|
|
|
|
|
|
|
Wanting to SBR your X95? Here's the short top rail for your Tavor® X95™!
Ideal for use with a 13-inch barrel and short foregrip. IWI factory aluminum part.
Made in Israel.
|
ShootingSight LLC has developed a customized multi-tool specifically for the IWI Tavor®. Contains the critical tools to maintain the rifle, including:
Barrel Removal Tool, Screwdriver to adjust the front sight windage, Phillips Screwdriver to remove handguards, Hex Wrenches to remove top and side rails, Awl to lift out spring pin in swivel, Hex Bit Socket to allow customized tips for any optics (hex tips available at most hardware stores). NOW INCLUDES A 3mm HEX BIT FOR THE X95!
Choose your PALS/MOLLE POUCH in Black,Tan, or ODG
Tav-Tool made in the USA!
|
The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!
Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.
Made in the USA!
|
|
|
