|
Tavor X95 Curved Buttpad
|
|
IWI TAVOR X95 Cocking Bar Assembly - charging handle with rod
|
|
Mako - FAB Defense Gen 2 Foregrip Bipod - rotating & pivoting
|
Our Price: $72.99 Sale Price: $65.99
|
|
|
|
|
|
|
|
The X95 Curved Buttpad features an aluminum skeleton structure with an overmolded rubber pad. The rubber pad is curved to conform to the shoulder and not only give better ergonomics and grip but also shortens the overall length of pull on the rifle. By keeping the top edge the same length as the OEM buttpad the rifle does not drop under 26" inches in length.
6.5 ounces. Fits the X95 (not the SAR or 7)
Made in the USA
|
A spare cocking bar with handle for your Tavor® X95. If you've bent or notched your cocking rod, or just want a second for dual handles, this is a must-have factory replacement. Assembled Charging Handle and Rod.
IWI-US Factory Part # TXP0020
|
The only fully functional bipod designed for precision shooting built into a vertical foregrip.
Gen 2 T-Pod with spring-loaded swivel feature and pressure switch mount.
Bipod allows firearm to rotate approximately 45º left or right of center for easily switching targets or tracking moving targets.
As well as, a slight pivoting action of the hinge point for full range of motion with the bi-pod legs deployed. Built for designated marksmen and those operating in urban settings who need to transition from close fighting to precision shooting. Issued to Israeli Special Forces and many US military units.
Available in Black, Flat Dark Earth, and Olive Drab Green.
Made in Israel
|
|
|
|
Tavor X95 Pistol Grip - with traditional trigger guard
|
|
Tavor X95 ForeGrip - SHORT
|
|
Tavor X95 Buttplate - THIN - SBR
|
|
|
|
|
|
|
|
A Pistol grip with traditional trigger guard for your Tavor® X95™ or Tavor® 7.
Please follow Section 14.1.4 Hand Grip Assembly in your Tavor® X95™ manual for removal and installation of your grip. A metric hex wrench is needed to remove the side panel screws.
|
Wanting to SBR your X95? Here's the short foregrip for your Tavor® X95™!
Available in BLACK, FDE, and ODG
Made in Israel.
|
Wanting to SBR your X95? Here's the thin buttplate for your Tavor® X95™!
LEGAL WARNINGS: See the technical specs for details before ordering
Hard Polymer.
Made in Israel.
|
|
|
|
Tavor® X95™ IDF Pistol Grip Panels (Inserts)
|
|
Magpul RVG™ - Rail Vertical Grip
|
|
FAB Defense Quick Release Ergonomic Vertical Foregrip
|
|
|
|
|
|
|
|
A pair of left and right IDF pistol grip panels for your Tavor® X95™ pistol grip with Tavor style trigger guard or traditional trigger guard.
These grip panels are identical to those currently on the X95 in use with the Israel Defense Force.
Choose your color: Black, FDE, OD
|
• Designed for use with milspec 1913 Picatinny rail hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip
• Ergonomically designed shape for use as traditional vertical grip
• Optimized for use with the “thumb break method” of shooting as taught by Magpul DynamicsSM
|
Strong and lightweight military-grade reinforced polymer composite forward grip, that reduces fatigue and increases control. Mounts on picatinny rail, with quick-release design and optional lock screw. Storage area for batteries, parts, etc..
Choose from Black, Flat Dark Earth, or OD Green
|
|
|
|
Mako - FAB Defense Tactical Vertical Grip with Battery Compartment
|
|
CAA - Short Vertical Grip - rubberized
|
|
Magpul AFG2 Angled Fore Grip
|
|
|
|
|
|
|
|
Vertical grip has a compact no-slip design for use with or without gloves.
Two pressure switch housings with an internal waterproof O-ring sealed storage compartment.
Quick-release mount with secure bolt locking option.
Made in Israel
|
Polymer and rubber forward grip with rubberized front and back panels and pressure switch mounts. Compact vertical forward grip puts the user in a comfortable fighting stance. No tools required.
|
• Polymer three-piece design with an interchangeable finger shelf that allows for a flat “A1-style” surface or an “A2-style” finger nub
• Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~3” recommended)
• All mounting hardware included
|
|
|
|
Ergo SureStop Tactical Rail Hand Stop
|
|
Mako - FAB Defense Instinctive Pointing Foregrip
|
|
TALON Grip Wraps for IWI X95 pistol grip
|
|
|
Our Price: $36.99 Sale Price: $32.99
|
|
|
|
|
|
|
ERGO SURESTOP Tactical Rail Hand Stop (Black)
Good for hand indexing on rifle and shotguns.
|
The ergonomic
Instinctive Pointing Foregrip conceptualizes within its design a unique Special Forces
combat proven shooting method incorporating natural pointing
positioning which enhances accuracy, speed and overall tactical
performance.
Made in Israel
|
TALON Grips for IWI X95 Pistol Grip. This rear wrap grip is available in both granulate and rubber textures and offers full side panel coverage, and high coverage on the front and backstrap. Color: BLACK
Choose textures: Rubber or Granulate
Made in the USA!
|
|
|
|
TALON Grip Wraps for IWI X95 Foregrip combined panels
|
|
Grenade MKII Forward Vertical Grip - Damage Industries
|
|
Bullpup Armory 4"x2" PVC Patch with Velcro Backing
|
|
|
|
|
|
|
|
|
TALON Grips for IWI X95 Foregrip. This grip is available in both granulate and rubber textures and offers great coverage on each of the three front panels. Color: BLACK
Choose textures: Rubber or Granulate
Made in the USA!
|
A unique, robust, and surprisingly ergonomic Vertical Fore Grip, that has the look of a "Pineapple Grenade". Constructed of 6061 Aluminum with Mil-Spec hardcoat anodize, black. The mount has a non-protruding clamp held with a stainless steel phillips head fastener. Reduced weight - cored out internal
storage area (accessible by unscrewing grip from the mount).
Made in USA!
|
The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!
Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.
Made in the USA!
|
|
|
