|
TAVOR SAR Conversion Kit (9mm Para)
|
|
TAVOR SAR or X95 556NATO Bolt (in-house conversion service)
|
|
TAVOR SAR Conversion Kit (556NATO)
|
List Price: $899.99 Our Price: $749.99
|
|
|
Our Price: $109.99 Setup Cost: $30.00
|
|
|
Our Price: $899.99 Sale Price: $799.99
|
|
|
|
|
|
IWI TAVOR SAR Conversion Kit converts an existing 5.56 rifle into a 9mm.
Includes all the parts needed for the 9mm conversion, one 32 round magazine**, and a barrel lock wrench.
9mm Parabellum conversion kit with a Cold Hammer Forged 17" barrel**, 1:10 twist, CrMoV steel
** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
|
IWI TAVOR SAR or X95 Bolt Conversion for 5.56NATO or 300BLK!
Bullpup Armory is a CERTIFIED IWI TAVOR ARMORER! Send us your TAVOR SAR or X95, and we'll switch the ejection to the other side per IWI specs. When you get your rifle back, you'll have the new configuration, plus the original bolt, for when you need to switch back to the original configuration. Fastest turnaround times in the industry!
** IWI-US requires the Tavor barrel and new bolt to be headspaced by an IWI certified gun-smith/armorer **
* Bolts are not available individually without purchasing a barrel set, or sending your Tavor to us for the install. (IWI Policy)
|
IWI TAVOR SAR Conversion Kit converts an existing 9mm rifle into a 5.56.
Includes all the parts needed for the conversion, 5.56 barrel, bolt/bolt-carrier, ejection port frame & shell deflector, one 30 round magazine**, and a barrel lock wrench. 5.56 NATO conversion kit with a Cold Hammer Forged 16.5" barrel**, 1:7 twist, CrMoV steel. Longer muzzle devices sold separately.
** Know your local laws! Certain items in the kit are restricted in some areas. We can remove the hi-cap mag, if required by your state (put a note in the comments section when checking out...)
|
|
|
|
IWI TAVOR SAR Bolt Parts Kit - 5.56 NATO "Survival Kit"
|
|
TALON Grip Wraps for IWI Tavor pistol grip
|
|
TALON Grip Wraps for IWI Tavor Foregrip
|
List Price: $49.99 Our Price: $44.99
|
|
|
|
|
|
|
|
|
Essential factory spare bolt parts with spare firing pin, firing pin spring, and other bolt parts for your Tavor® SAR or X95 in 5.56 NATO.
|
TALON Grips for IWI Tavor Pistol Grip. This rear wrap grip is available in both granulate and rubber textures and offers full side panel coverage, and high coverage on the front and backstrap. Color: BLACK
Choose textures: Rubber or Granulate
Made in the USA!
|
TALON Grips for IWI Tavor Foregrip. This grip is available in both granulate and rubber textures and offers great coverage all around. Color: BLACK
Choose textures: Rubber or Granulate
Made in the USA!
|
|
|
|
Thermold 556NATO Magazine Charger-Loader (10 round - 5.56..223 Mags)
|
|
Bullpup Armory - TAVOR and X-95 Barrel Lock Wrench
|
|
maglula - 9mm LULA™ magazine loader and unloader (for the TAVOR® 9mm mags)
|
Our Price: $9.99 Sale Price: $6.99
|
|
|
|
Our Price: $29.99 Sale Price: $26.99
|
|
|
|
|
|
LOADER - 10 round black Zytel nylon magazine charger for 5.56 AR-type Mags. Fits all Thermold 5.56 mags, as well as Lancer and PMags (any "AR" mag really...) Use with stripper clips or individual rounds for a smooth, quick feed.
Made in the USA!
|
IWI TAVOR SAR & X-95 Barrel Lock Wrench. Made from 17-4PH Stainless, with a rubberized handle. Hardened strength, corrosion resistant, and a comfortable grip that won't scratch your Tavor!
Always refer to the IWI Owners Manual when disassembling-reassembling a Tavor/X-95.
Made in the USA!
|
All-in-one magazine speed loader (and unloader) for 9mm Tavor® magazines (ASC and IWI).
This small, lightweight, reinforced-polymer device is durable, and simple to use in either mode (loading or unloading). Prolongs magazine life, by eliminating wear on the feed lips during loading-unloading. Reliable in all weather, the LULA is tested and combat proven.
No more thumb pain!
|
|
|
|
maglula - 556 (223) LULA™ magazine loader and unloader
|
|
ShootingSight TAV-TOOL - multi-tool specifically for the Tavor® X95 and SAR
|
|
TAVOR and X-95 Zeroing Sight Wrench - factory
|
|
|
|
List Price: $9.99 Our Price: $8.99
|
|
|
|
|
|
All-in-one magazine speed loader (and unloader) for all metal and plastic 5.56mm / .223 magazines, including PMAG’s and Lancer.
This small, lightweight, reinforced-polymer device is durable, and simple to use in either mode (loading or unloading). Prolongs magazine life, by eliminating wear on the feed lips during loading-unloading. Reliable in all weather, the LULA is tested and combat proven.
No more thumb pain!
|
ShootingSight LLC has developed a customized multi-tool specifically for the IWI Tavor®. Contains the critical tools to maintain the rifle, including:
Barrel Removal Tool, Screwdriver to adjust the front sight windage, Phillips Screwdriver to remove handguards, Hex Wrenches to remove top and side rails, Awl to lift out spring pin in swivel, Hex Bit Socket to allow customized tips for any optics (hex tips available at most hardware stores). NOW INCLUDES A 3mm HEX BIT FOR THE X95!
Choose your PALS/MOLLE POUCH in Black,Tan, or ODG
Tav-Tool made in the USA!
|
IWI TAVOR SAR and X-95 Sight Tool for zeroing the integral rail back-up sights
Always refer to the IWI Tavor Owners Manual.
|
|
|
|
IWI TAVOR Official Gunsmith Bench Mat
|
|
MS Clean Kit
|
|
Bullpup Armory 4"x2" PVC Patch with Velcro Backing
|
|
|
|
|
|
|
|
Gunsmith/Armorers bench mat with Tavor® SAR exploded view diagram and a list of parts. The
soft polyester-cloth top will protect your gun from scratches. The non-slip
neoprene rubber back will prevent chemicals and oils from damaging your
workspace.
12" x 36" x 1/8" thick
|
Magazine shaped cleaning kit. Available as a full kit (see Extended Information tab), or as an empty box ($19.99) for your own gear.
Developed by Top Shot's Peter Palma and Made in the U.S.A.!
|
The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!
Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.
Made in the USA!
|
|
|
