|
Gear Head Works Tavor Razorback - Short
|
|
Gear Head Works Tavor Razorback - Full Length
|
|
Gear Head Works IDF Magnifier Rail
|
|
|
|
|
|
|
|
|
Replacement rail for the Tavor SAR or X95. This is the "short" version. The SAR rail has a 20-slot rail that extends just over the gas block, and the X95 rail has 24-slots with the gas adjustment hole for 300BLK. Both add some height for a more comfortable cheek weld. Another advantage is that the rail does not need to be removed to do a barrel change (no re-zeroing!). The "short" version gives the flattop SAR owner a mod that inspires a more IDF-model look. And the X95 short rail is inspired by the Israeli sub-machine-gun X95.
Choose SAR or X95 Made in the USA! ** This listing is for the replacement rail only! The rifle, optics, and any other accessories shown are for display purposes only...
|
Replacement rail for the Tavor. This is the "Full Length" version, which is a 35-slot rail that is the same length as the flat-top models, but adds some height for a more comfortable cheek weld. Another advantage is that the rail does not need to be removed to do a barrel change (no re-zeroing!). Made in the USA! ** This listing is for the replacement rail only! The rifle, optics, and any other accessories shown are for display purposes only...
|
Finally IDF owners have a way to use thier own magnifier on their IDF-model Tavor. The Gear Head Works IDF Magnifier Rail has a 7-slot standard Mil Spec 1913 rail and a quick rotating mount all machined as one piece. It can be used with magnifiers, night vision, or thermal and allows the entire unit to be quickly removed from the rifle. No need for expensive QD rings. Use a standard fixed ring or mount and let this rail be the way you attach it in the field. Made in the USA! ** IDF Model only! Not for use with "Flat-Top" Tavors... **
|
|
|
|
Gear Head Works Tavor Razorback - IDF 101 Rail
|
|
Gear Head Works Tavor Razorback Front Sight
|
|
Gear Head Works Tavor Modular Forearm (TMF) - M-Lok compatible
|
|
|
|
|
|
|
|
|
A taller rail for the IDF model Tavor, for a more comfortable cheek-weld. The IDF 101 Rail from Gear Head Works replaces the factory installed Mepro, attaching directly to the gas block (similar to the factory installed Mepro). And it still allows for a co-witness with the factory flip-up sights. Made in the USA!
** IDF Model only! Not for use with "Flat-Top" Tavors... **
|
The Gear Head Works Razorback Front Sight matches up to most AR15 rear sights when used on your short Tavor Razorback. Inspired by the factory IDF front sight, it operates the same way, folding up and down just like the factory IDF front sight.
The Razorback Front Sight comes with genuine IDF hardware making it fully adjustable for elevation and windage. However, it does NOT come with a front sight post, plunger or plunger spring (typically the tritium front sight post, spring, and plunger should be used from your original flat top rail.) Made in the USA!
|
An aluminum replacement forearm with modular capabilities for the Tavor by Gear Head Works, called the Tavor Modular Forearm, or simply the TMF. Light mounting is included! Attach 1" light or laser in-line with the barrel, slots for ventilation and accepts Magpul M-Lok accessories.
Black, FDE, or OD Green
Rifle, light, grip, pressure pad, and pad kit shown in pictures, not included.
Made in the USA!
|
|
|
|
Homeland Guns WOR (Wash Out Remover) Kit for the Mepro21
|
|
CAA - 5 Position Laser and Light Mount 1"
|
|
Mako - FAB Defense Quick-Release Offset Light Mount (1")
|
|
|
|
|
|
|
|
The W.O.R. helps with the "wash-out" experienced when aiming the Mepro21 into a well lit area, from a dark area.
The light collector on the Mepro21 has dimmed the reticle from the lack of light in the immediate area, although a brighter reticle is needed when pointed from the "dark" area into a "bright" area. The W.O.R. solves the issue!
By installing the W.O.R. on the Mepro21, you can turn it on when a brighter reticle is needed.
Available in the original "On/Off" model, or a "Rheostat" (adjustable brightness) model.
|
Quickly move your light or laser from one side of the weapon to the other.
• Light or laser can be quickly repositioned for all situations
• Operator can easily access on/off button with thumb while using a vertical grip
• Locks in position at 0° 45° 90° 135° 180°
|
Quick release, offset/side, composite rail mount for most 1-inch lights.
|
|
|
|
Mako - FAB Defense Quick-Release Light Mount (1")
|
|
GGG 45 Degree Offset Accessory Rail
|
|
Tapco Intrafuse Riser Mount
|
|
|
|
|
|
|
|
|
Quick release, in-line, composite rail mount for most 1-inch lights.
|
The 45-degree Offset Accessory Rail is an ambidextrous design, that allows for small micro red-dot optics to be mounted at a 45 degree anfle for close range engagements.
|
The INTRAFUSE Riser Mount is a lightweight mount that lets you lift your optics.
The side locking nuts are made to be used without the need to carry any extra tools.
Made from the highest strength composite this mount is tough without adding unneeded weight.
|
|
|
|
Bullpup Armory 4"x2" PVC Patch with Velcro Backing
|
|
|
|
|
|
|
|
|
The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!
Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.
Made in the USA!
|
|
|
