|
Kel-Tec RFB Buttpad Spacers
|
|
Kel-Tec RFB Tactical Operating Handle
|
|
Tac Pro RFB Cheek Rest
|
|
|
|
|
|
|
|
The RFB Buttstock Spacers are designed to allow the shooter to customize the length of the RFB stock, effecting the length of pull. Each spacer will add approximately half an inch (0.55 inches) to the length of the RFB stock, allowing the shooter to customize their level of shooting comfort. The kit includes three (3) spacers.
Made in the USA!
|
The Kel-Tec RFB Tactical Operating Handle is approximately 100% longer, approximately 20% wider, and has a stronger, wider scallop cutout compared to the original RFB charging handle. The combination of these allow for easier and smoother operation. And, just like the original, it can be mounted on either side of the RFB (ambidextrous!)
Made in the USA!
|
• Manufactured from .125" thick Kydex 100 for maximum durability
• Fits all Kel-Tec RFB rifles
• Unbreakable Kydex Cheek Rest
• Precision formed for a perfect fit
• Smooth, machined edges
• Protects your face from hot or cold temperatures, while protecting the metal of your RFB from sweat and dirt
• Does not interfere with sling attachment, or basic take-down for cleaning
• Snap-on installation. No tools required
|
|
|
|
RFB QD SWIVEL (front)
|
|
Damage Industries Multi Mount
|
|
Kel-Tec RFB Quad Rail
|
|
|
|
|
|
|
|
Low profile, light weight, durable S.S.Q.D. sling mount solution for AR15 TRX Extreme rails.
Includes a S.S.Q.D Sling mount.
Optional RFB attachment kit, adds the proper length Stainless Steel bolt, washer, and lock-nut, as well as a rubber washer for a finished look. (+ $3 for the fitting kit for the RFB)
|
Attach your sling in multiple configurations on any 1913 rail. Mount it to the top, sides or bottom of your rifle with loop, QD swivel, snap-hook, Mash hook, or paracord. QD sockets have anti-rotational limits. Constructed of billet aluminum with Mil-A-8625 type III class 2 hardcoat anodize. Black.
Swivel/hook not included.
Sold individually.
Made in the USA!
|
The Kel-Tec RFB Quad Rail threads onto the barrel at the end of the stock, and provides four MIL-STD 1913 Picatinny Rail attachment points. Two scalloped cut-outs on the top of the Quad Rail allow the shooter freedom to adjust the gas system if needed and allow the ejected casings to leave the ejection port. An additional riser is available separately, and raises the top quad rail to be in-line with the rifles top rail.
Made in the USA!
|
|
|
|
Kel-Tec RFB Riser
|
|
Kel-Tec RFB Muzzle Brake Kit
|
|
Kel-Tec RFB Handguard Picatinny Rail
|
|
|
|
|
|
|
|
The Kel-Tec RFB Riser is intended to be used with the RFB Quad Rail (sold separately) to match the height of the Top Picatinny Rail of the RFB for increased sight radius, etc.
Made in the USA!
|
The RFB Muzzle Brake Kit is designed to replace the existing flash-hider (which comes standard on the RFB Rifle.) This Muzzle Brake is designed to lessen the felt recoil of the RFB and the vertical muzzle lift as the rifle is fired. Those benefits will allow the shooter to re-gain their sight alignment quicker for follow-up shots. A "fast" 308 is just plain FUN!!
Made in the USA!
|
A 12-slot Aluminum Picatinny Rail designed by Kel-Tec specifically for the bottom of the RFB hanguard (to mount vertical fore-grips, etc)
Made in the USA!
|
|
|
|
Bullpup Armory 4"x2" PVC Patch with Velcro Backing
|
|
|
|
|
|
|
|
|
The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!
Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.
Made in the USA!
|
|
|
