|
KSG BEAST Muzzle Device - Gear Head Works
|
|
Hi-Tech KSG Short "Crusher" Breacher
|
|
Hi-Tech KSG "Defender" Muzzle Brake - Anodized Aluminum
|
|
|
|
|
|
|
|
|
This intimidating part will give your KSG a whole new look. The Beast features M-lok slots on 3 sides. Also has limited rotation sling cups on each side so now you can have that quick detach sling. It retains the factory style sling loops as well. The crenelated edge gives you a good grip for door breaching.
The Beast closes the gap left when using a Salvo suppressor, keeping the uninterrupted monolithic look that is a signature of this pump gun. Made in the USA! The use of a choke adapter (not a brake or flash-hider) is mandatory (or the warranty will be voided.)
** Know your local laws! Attaching this product to a firearm may violate local rules, laws, etc. It is the customers responsibility to know their local restrictions. **
|
Muzzle device for the KSG that is CNC machined from steel for high volume shooters & durable breaching. Vented ports machined to dissipate gasses thus reducing recoil. And, aggressive notches milled out in front for Door, Lock, Glass Breaching. New DLC Flat Stealth Black Finish.
Made in the USA!
** Know your local laws! Attaching this product to a firearm may violate local rules, laws, etc. It is the customers responsibility to know their local restrictions. **
|
CNC Machined from lightweight Aircraft Billet Aluminum, to keep the weight down on the front, the Defender muzzle brake has vented ports to dissipate gasses thus reducing recoil. Notches are milled out around the front egde for Door, Lock, Glass Breaching, and an aggressive look. Black Hard Anodized to Military spec MIL-A-8625 Type III Class 2 for Steel like Strength without the weight.
Made in the USA!
** Know your local laws! Attaching this product to a firearm may violate local rules, laws, etc. It is the customers responsibility to know their local restrictions. **
|
|
|
|
Hi-Tech KSG "Defender" Muzzle Brake - STEEL
|
|
Hi-Tech KSG "Defender" Choke Adapter - Steel
|
|
Hi-Tech CC KSG Enlarged Eye Attachment for HK Snap Hooks Single Point Slings
|
|
|
|
|
|
|
|
A Steel muzzle Break for High Volume KSG shooters. CNC Machined from 1018 Steel with vented ports machined to dissipate gases, and notches milled out in front for Door, Lock, Glass Breaching, and an aggressive look.
New DLC Gun finish in Stealth Flat Black.
Made in the USA!
** Know your local laws! Attaching this product to a firearm may violate local rules, laws, etc. It is the customers responsibility to know their local restrictions. **
|
Hi-Tech's "Defender" Muzzle device for the KSG that is made to accept Remington Choke Tubes! CNC Machined from 1018 Steel, with New DLC Chemichal Flat Black Finish. Grooves machined to reduce weight.
Comes with complete directions to install
Uses any Remington 12 Guage Chokes. Choke(s) not included.
Made in the USA!
** Know your local laws! Attaching this product to a firearm may violate local rules, laws, etc. It is the customers responsibility to know their local restrictions. **
|
Hi-Tech Customs has improved on the simple KSG single sling attachment point. Enlarging the hooking loop allows you to attach any HK Snap Hook Sling. CNC Machined from Steel Plate the attachment locks into place with no modification. Complete directions included for an easy do it yourself install. Black Oxide finish for steel protection
Choose one: LEFT side or RIGHT side
Made in the USA!
|
|
|
|
Hi-Tech Custom's KSG QD Quick-Detach Single-Point Sling Attachment
|
|
Kel-Tec KSG Choke Tube Adapter
|
|
KSG Barrel Nut Remover Tool
|
|
|
|
|
|
|
|
Hi-Tech Customs has improved on the simple KSG single sling attachment point by offering a QD attachment point. Allows you to attach any QD Sling or QD Swivel to your KSG. CNC Machined from Steel Plate and 2024-T3 Aluminum, the attachment locks into place with no modification. Complete directions included for an easy do it yourself install. Q.D. Block is Black Hard Anodized to Military spec MIL-A-8625 Type III Class 2 for Steel like Strength without the weight.
Choose one: LEFT side or RIGHT side
Made in the USA!
|
The Kel-Tec KSG Choke Tube Adapter is a replacement for the barrel ring (nut), and allows the KSG to accept WinChoke's! This devise requires the proper Barrel Ring Lug for removal and installation, and a thread compound is necessary.
Choke Tube Adapter for the KSG. Accepts WinChoke's.
The KSG-537 Barrel Ring Lug must be used to install the choke tube
adapter. - See more at:
http://www.keltecweapons.com/ksg/ksg-accessories/ksg-choke-tube-adapter/#sthash.0QvsypTW.dpu Choke
Tube Adapter for the KSG. Accepts WinChoke's. - See more at:
http://www.keltecweapons.com/ksg/ksg-accessories/ksg-choke-tube-adapter/#sthash.C3Qmxq65.dpuf Choke Tube Adapter for the KSG. Accepts WinChoke's.
The KSG-537 Barrel Ring Lug must be used to install the choke tube
adapter. - See more at:
http://www.keltecweapons.com/ksg/ksg-accessories/ksg-choke-tube-adapter/#sthash.0QvsypTW.dpuf
Made in the USA!
|
A Stainless Steel Barrel Nut Remover specifically for the Kel-Tec KSG Shotgun.
This product, from Hi-Tech Custom Concepts, safely slips on over your entire Barrel Nut and firmly holds on as you unlock the nut. Will not slip off and damage your gun finish.
Choose 4-notch or 6-notch Lug Tool
Made in the USA!
|
|
|
|
Bullpup Armory 4"x2" PVC Patch with Velcro Backing
|
|
|
|
|
|
|
|
|
The Bullpup Armory logo in 3D!! The textures and colors of this new patch are outstanding! This patch matches a full range of "tactical" colors: tans, browns, greens, greys, and blacks. A "shout-out" to MilSpecMonkey for making great patches for the Bullpup fan!
Bullpup Armory PVC Rubber Patch is 4" wide x 2" tall, with hook-velcro backing mating easily with any loop-velcro surface.
Made in the USA!
|
|
|
