|
High Tower Armory 90/22™ - Bullpup Conversion Kit
|
|
Aklys Defense ZK-22 - Ruger® 10/22® Bullpup Conversion Kit
|
|
Magpul MBUS Back-Up Sight – Rear GEN 2
|
|
|
Our Price: $249.99 Sale Price: $229.99
|
|
|
Our Price: $55.49 Sale Price: $48.99
|
|
|
|
|
|
The High Tower Armory 90/22 is a compact,
maneuverable Bullpup conversion/stock kit for the Ruger® 10/22® which utilizes a fully
ambidextrous Bullpup design for superior balance and ergonomics. This
incredibly durable, military grade polymer stock will reduce the overall
length of most 10/22’s to about 26 1/2 inches, just over the federally
required minimum length for rifles!
Fits factory 18 1/2" contour barrels and .920" bull
barrels at least 18 inches in length (17 1/4 inches from receiver face
to muzzle). Know your laws/restrictions, as this product functioning with a donor firearm may not be legal in some areas.
Made in the USA!
A HTA 90/22 Extended Mag and Bolt Release combo ($29.99 value) is included FREE with these kits!
Ruger 10/22 not included
|
The Aklys Defense ZK-22 drop-in stock kit will accept any standard Ruger
10/22 receiver with carbine barrel, or .920" Bull barrel ,18.5" or
longer.
This conversion turns your tried and true Ruger carbine into a lightweight, rugged ambidextrous Bullpup.
Fits factory 18 1/2" contour barrels and .920" bull
barrels at least 18.5 inches in length. Know your laws/restrictions, as this product functioning with a donor firearm may not be legal in some areas.
Made in the USA!
Ruger 10/22 and other accessories shown are not included.
|
• Low-cost, color injection molded, folding back-up sight
• Dual aperture Sight is adjustable for windage
• Fits all Milspec 1913 Picatinny rail equipped firearms
|
|
|
|
Magpul MBUS Back-Up Sight – Front GEN 2
|
|
CAA - 5 Position Laser and Light Mount 1"
|
|
Mako - FAB Defense Quick-Release Offset Light Mount (1")
|
Our Price: $37.99 Sale Price: $33.99
|
|
|
|
|
|
|
|
• Low-cost, color injection molded, folding back-up sight
• Adjustable for elevation
• Fits all Milspec 1913 Picatinny rail equipped firearms
|
Quickly move your light or laser from one side of the weapon to the other.
• Light or laser can be quickly repositioned for all situations
• Operator can easily access on/off button with thumb while using a vertical grip
• Locks in position at 0° 45° 90° 135° 180°
|
Quick release, offset/side, composite rail mount for most 1-inch lights.
|
|
|
|
Mako - FAB Defense Quick-Release Light Mount (1")
|
|
GGG 45 Degree Offset Accessory Rail
|
|
Blue Force Gear VCAS Padded Sling
|
|
|
|
|
|
|
|
|
Quick release, in-line, composite rail mount for most 1-inch lights.
|
The 45-degree Offset Accessory Rail is an ambidextrous design, that allows for small micro red-dot optics to be mounted at a 45 degree anfle for close range engagements.
|
The Vickers Combat Applications Sling has revolutionized the way rifles are carried. Ability to quickly transition from carrying a slung rifle comfortably to combat ready, the patent pending Quick Adjust has bridged the gap between the two primary uses of rifle slings – from transporting to fighting. The padded, two-point VCAS is available in Black or Coyote Brown.
Made in the USA!
|
|
|
|
Blue Force Gear Vickars VCAS 221 Padded Sling - 2to1 with R.E.D. Swivel Knob
|
|
Magpul Sling Mount Kit - Type 1 - QD Cup
|
|
Magpul Sling Mount Kit - Type 2 - QD Cup
|
|
|
|
Our Price: $18.99 Sale Price: $17.99
|
|
|
|
|
|
|
While 2-point slings are ideal for most situations, there are times when a 1-point sling has a clear advantage. Combining the polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjust-ability of the sling is still maintained in both 1 and 2 point modes. The 221™ Sling fits any weapon with two QD sling swivel sockets. The padded, 221 VCAS is available in Black or Coyote Brown. Made in the USA!
|
Sling Mount Kit - Type 1 QD cups for use with push-button QD sling swivels.
The hole, for the enclosed button head screws, is not threaded. The chosen screw simply passes through the hole in the bottom of the cup.
Heavy-duty black phosphatized steel construction easily installs with provided hardware.
Swivels not included.
Made in U.S.A.
|
Sling Mount Kit - Type 2 QD cup for use with push-button QD sling swivels.
The hole, in the bottom of the cup, is threaded.
Heavy-duty black phosphatized steel construction.
Swivel(s) and screw(s) not included.
Made in U.S.A.
|
|
|
|
Magpul Sling Mount Kit - Type 3 - QD Cup
|
|
Magpul MS3 Dual-ParaClip GEN2 Sling
|
|
Magpul RSA QD Rail Sling Attachment
|
|
|
|
|
|
|
|
Sling Mount Kit - Type 3 QD cup for use with push-button QD sling swivels.
The hole, in the bottom of the 3/4" tall (deep) cup, is threaded. And comes with a 10/24 x 1" button head screw and nut
Heavy-duty black phosphatized steel construction.
Swivel(s) not included.
Made in U.S.A.
|
The MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. The rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure.
The MS3 GEN 2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.
Black or Coyote Brown
Made in U.S.A.
|
The RSA QD provides a sling attachment point for the MS4 and other QD sling systems
• Steel construction
• Melonite finish
• Compatible with 1913 Picatinny rails
|
|
|
|
Magpul MS4 Dual QD GEN2 Sling
|
|
Magpul RSA Rail Sling Attachment
|
|
GG&G QD Rail Side Sling Mount
|
|
|
|
|
|
|
|
|
The
MS4 can quickly switch between one-point and two-point configuration.
The MS4 maintains material construction and specifications identical to
that of the standard MS3, but features two heavy-duty push-button QD
sling swivels rather than the Magpul Paraclip™ aling with a steel D-Ring
to allow one to two-point convertibility. This modification allows
compatibility with QD sling cups commonly found on lower receivers,
receiver end plates, buttstocks, and many low-profile forward QD Sling
mounts, including the Magpul RSA-QD.
The MS4 Dual QD GEN 2 incorporates a new low profile quick-adjust
Slider which minimizes bulk and allows for secure, yet effortless, sling
adjustment. Webbing length has also been increased for a comfortable
fit with all body types and armor configurations.
Made in U.S.A.
|
• All cast steel construction
• Mil-spec black manganese phosphate finish
• Works on any standard 1913 Picatinny-spec rail
|
The Quick Detach Sling Mount For Dovetails keeps the weapon slung in the correct position to avoid canting outwards away from your body.The QD swivel socket has limited rotation built in to prevent sling wrap-up.
Accepts all Heavy Duty or Standard push button sling swivels.
Mount comes complete with one GG&G Enhanced Heavy Duty Rectangular QD sling swivel.
Perfect for the rear-lower rail of the RFB!
Made in the U.S.A.
|
|
|
|
Magpul MS3 Single-QD and Single-ParaClip GEN2 Sling
|
|
Damage Industries Multi Mount
|
|
Magpul QD ParaClip Adapter
|
|
|
|
|
|
|
|
|
Filling the same mission requirement as the standard MS3 Sling, the
MS3 Single QD can quickly switch between one-point and two-point
configuration. The MS3 Single QD maintains material construction and
specifications identical to that of the standard MS3, but features a
heavy-duty push-button QD sling swivel for the one-point (rear) weapon
attachment rather than the Magpul Paraclip™. This modification allows
compatibility with QD sling cups commonly found on lower receivers,
receiver end plates, and buttstocks. The MS3 Single QD GEN 2
incorporates a new low profile quick-adjust Slider which minimizes bulk
and allows for secure, yet effortless, sling adjustment. Webbing length
has also been increased for a comfortable fit with all body types and
armor configurations.
Made in U.S.A.
|
Attach your sling in multiple configurations on any 1913 rail. Mount it to the top, sides or bottom of your rifle with loop, QD swivel, snap-hook, Mash hook, or paracord. QD sockets have anti-rotational limits. Constructed of billet aluminum with Mil-A-8625 type III class 2 hardcoat anodize. Black.
Swivel/hook not included.
Sold individually.
Made in the USA!
|
Adapts QD swivel sockets for use with Paraclips and other clip-in sling attachments. Precision-cast Melonite finished steel for extreme resistance to wear and corrosion.
Made in the USA!
|
|
|
|
Troy Mash Hook
|
|
QD Swivel
|
|
Blue Force Gear RED Swivel - Rapid Emergency Detachment
|
|
|
|
|
|
|
|
|
MASH Hook (Metal All-purpose Snap Hook)
|
Heavy Duty QD Sling Swivels.
Sold individually
Choose from:
1.25" Oval, Large D-Loop, Small D-Loop, Angular 1" (add $9 for the angular swivel)
Made in the USA
|
The RED Swivel is a true emergency quick release swivel that allows the user to quickly get free for emergency egress or untangle. The Patented RED Swivel, or Rapid Emergency Detachment Swivel, replaces standard push button sling swivels with a pull-knob emergency release swivel that fits any standard push button sockets, sockets inset in popular handguards and stocks.
Fits 1" and 1.25" sling webbing. One RED Swivel per package.
Made in the USA!
|
|
|
|
MAGPUL MOE 7 slot Rail - fits ZK-22
|
|
Ruger BX-25 1022 25-Round Magazine
|
|
Plano All Weather Tactical Case 36-inch
|
|
|
|
|
|
|
|
MAGPUL MOE Polymer Rail Sections - 7-Slot - 3.3" long
Fits the ZK-22!
|
This genuine Ruger factory magazine with Ruger logo has been tested and has proven to feed as reliably as the standard 10-round Ruger rotary magazine. Specifications: - BX-25 magazines will work with any factory original Ruger 10/22 rifle, SR-22 rifle, and 22 Charger pistol - 25 Rounds - Polymer Black
** Know your local laws! Attaching this product to a firearm may violate local rules, laws, etc. It is the customers responsibility to know their local restrictions. **
|
All Weather strength and protection in a new size perfect for Bullpups. This sturdy case boasts ultra thick walls, Dri-Loc weather resistant seal, heavy-duty dual stage latches with a pressure release valve. "Pluckable Foam" lets you customize the padding to fit your Bullpup and accessories. Everything you want in a high-end case, but at a fraction of the cost.
Due to the box fitment for this case, it will usually ship separate from any other items ordered.
|
|
|
|
Alpha Battle Carrier Sling Pack 34" Multi-Firearm Case
|
|
Alpha Battle Carrier Sling Pack 30" Multi-Firearm Case - Black with Electric Blue only
|
|
Blackhawk Diversion Carry Racquet Bag
|
Our Price: $69.99 Sale Price: $54.99
|
|
|
Our Price: $69.99 Sale Price: $54.99
|
|
|
|
|
|
|
|
The 34" case comes in Black with Electric Blue, Black with Grey, and Dark Earth
• Low Profile, Ambidextrous Design
• Well Padded Back Support to Provide Maximum Comfort
• Three Reinforced One-piece Wraparound Carry Handles for Horizontal or Vertical Carry
• Heavy Duty UTG Zippers with Wear Resistant Pulling Cord
• Ergonomic Wide Shoulder Strap with Reinforced Padding for Long Lasting Wear
• Fully Adjustable Straps with Heavy Duty Buckle, Attachable to Either Side of the Sling Pack for Ambidextrous Use
• Robust Trapezoidal Shaped Barrel Catch
• Quick Pull Handles for Rapid Weapon Access
• One Ambidextrous Pistol Holster and 3 Front lined Pockets for Pistol, Magazines, & Accessories
This bag will change the way you look at UTG! Outstanding product!!
|
The 30" case only comes in Black with Electric Blue.
Detail Information:
• Low Profile, Ambidextrous Design
• Well Padded Back Support to Provide Maximum Comfort
• Three 2" Reinforced One-piece Wraparound Carry Handles for Horizontal or Vertical Carry
• Heavy Duty UTG Zippers with Wear Resistant Pulling Cord
• Ergonomic Wide Shoulder Strap with Reinforced Padding for Long Lasting Wear
• Fully Adjustable Straps with Heavy Duty Buckle, Attachable to Either Side of the Sling Pack for Ambidextrous Use
• Rust Trapezoidal Shaped Barrel Catch
• Quick Pull Handles for Rapid Weapon Access
• One Ambidextrous Pistol Holster and 3 Front Pockets for Pistol & Accessories
|
Take concealment to a whole new level with the Diversion Racquet Bag. Featuring padded walls with an inner shell, this clever bag mimics an ordinary tennis racquet case but allows you to keep firearms protected and out of sight.
• Constructed of 420 velocity nylon
• Internal divider for carrying up to two firearms or separated upper/lower AR-15 receivers (up to 28” long)
• Perfect fit for the PS90, 90/22, and ZK-22
• Padded walls with inner shell hide firearm outlines
• Heavy-duty lockable zipper sliders
|
|
|
